CONTROLLERS

Simple and easy-to-use, the Spartan Series Basic CO2 Controller gives you everything you need to accurately raise the CO2 levels in your growing environment. A large easy-to-read display will show you what your ppm levels are and knobs that double as butt

The Spartan Series® Metal 24 Light 240 V Controllers bring you quality and reliability for an economical cost. The heavy-duty enclosure will stand up to the rigors of a growing environment while controlling your lights flawlessly. The controllers utilize

The Autopilot PX1 Digital Lighting Controller from Hydrofarm provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple USB-compatible Hydrofarm ballasts at once—up to 256 in each of two independent

The Hyperion® 2 is the solution when looking for a complete environmental and lighting controller. Using the Hyperion® platform and SunWave® Technology, this product has the ability to control and monitor: temperature, humidity, CO2 and turn on and off fo

The CGC-1e Complete Greenhouse Controller controls all of the main devices required in today's modern hydroponic garden—your HID lights, supplemental CO2, hydroponic pumps, and exhaust fans or air conditioner. Your garden's HID lights are controlled by a

The Autopilot Dehumidifying Humidistat is a compact and easy-to-use controller for dehumidifiers and exhaust fans. Simply plug it into a power receptacle and then plug your dehumidifying device into its outlet, then choose your preferred relative humidity

Allows precise humidity control with a 20%-90% range.
Change from ‘humidification’ to ‘dehumidification’ with a flip of a switch.
Controls any 120 volt humidifier, dehumidifier or fan.
Durable powder coated, steel enclosure will stand up to the toughest c

This controller will run four (4) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Plug relay trigger cord into 24 hour wall timer to run your lights. Universal outlets allow total flexibility. Plasti

Absolute total complete control of your grow room from up to 150 feet away without wires, the Hyperion™ 1 Wireless/Environmental/Lighting controller is the solution! Monitor & control the CO2, temperature and humidity during the day & night periods. Then

The Autopilot Greenhouse Master Controller (GMC) is designed to precisely control temperature, humidity, and CO2 in the growing area.

The GMC's enclosure features four separate power outlets used to connect external devices such as fans, CO2 injectors, a

Accuracy, innovative features, and unbeatable affordability in one small, user-friendly CO2 monitor. To deliver its measurements, the Autopilot APCEM2 Desktop CO2 Monitor features a clear display system that boasts a digital chart of memory-logged CO2, re

Hydrofarm's Fan Speed Controller was designed especially for centrifugal fans. This means it will help prevent damage to fan motors, ensuring longer life. (Meant for use with permanent split capacitor type motors, all Hydrofarm inline fans, and Active Air

The Autopilot Digital Environmental Controller (DEC) precisely controls temperature and humidity within your grow area. The DEC coordinates the use of supplemental CO2 injection within the temperature function. The DEC has four outlets and a 15' remote co

Works with AC/DC brush-type motors 15 amps or less.
Three adjustable switch settings: full, variable and off.
When switch is set to variable, adjustable knob controls fan speed.
6’ - 120 volt power cord.
Will not work with soft-start or slow-start motors.

Adjusts fan speed from 10% - 100%. Fire-up feature provides full power upon start-up and then drops to desired setting on dial. Enclosure protects internal components from dust, rust and moisture. Easy to operate. 6 Amps maximum/120 Volts/60 Hz.

Manual setting to slow down centrifugal fan speed between 10% and 100% of full power. Enables the user to activate/deactivate a 'Kick start' at power up or power failure return, to improve larger fan start-up. Can drive single phase 120 V induction motor

The BEC-1a Basic Environmental Controller is designed to control fans, air conditioners, dehumidifier and other equipment in gardens, greenhouses, grow rooms or other environments. The BEC-1a can operate in 3 different modes: cooling/dehumidification, coo

Precise cycle timer with day/night detection

Controls any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2 injection, turning on and off exhaust f

Allows user to select minimum fan idle speed between 25% & 60% of fan rating.
Enables the user to activate/deactivate ‘low temperature’ safety feature.
Temperature control range is 55° F to 95° F.
6 foot temperature probe is accurate to within 2° F.
Plast

The Atlas 9 is an easy to use digital CO2 controller with knobs to adjust your PPM set point and dead-band to operate your CO2 regulator or CO2 generator. The Atlas 9 has a 15’ remote sensor that includes the photocell and CO2 sniffer. The photocell ensur

The LF-2 Ballast Switching Controller allows you to expand your growing area without having to increase power requirements or purchase additional ballasts. All you need is an additional reflector and lamp for each ballast in your system.

Expand your gro

This product provides protection for your lights should your power go out. It’s a low cost security system for your lamps that give you the peace of mind you’re looking for with your lighting system.

The Hades 1™ is easy to use. Just plug the 120 Volt r