ENVIRONMENTAL CONTROLLERS

No bells and whistles, just connect your CO2 generator and you're set! This is Grozone's beginner solution for growers looking for affordable and easy-to-use CO2 controller. User can select from five pre-set CO2 control values (1000, 1125, 1250, 1375 and

Simple and easy-to-use, the Spartan Series Basic CO2 Controller gives you everything you need to accurately raise the CO2 levels in your growing environment. A large easy-to-read display will show you what your ppm levels are and knobs that double as butt

This CO2 Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

The Spartan Series® Metal 24 Light 240 V Controllers bring you quality and reliability for an economical cost. The heavy-duty enclosure will stand up to the rigors of a growing environment while controlling your lights flawlessly. The controllers utilize

Easy to use—plug fan into receptacle, then plug controller into 120 V power supply. Features an easy-to-read digital display. The 6 ft remote temperature probe allows for accurate temperature readings to be taken. Wide cooling range from 40°F to 108°F. Se

Built to the high levels of quality Titan Controls® is known for, the Spartan Series® CO2 Controller/Monitor allows you to supercharge your garden at an affordable price. Capable of controlling both a CO2 regulator or a CO2 generator, this controller give

Active Air washer O-ring for CO2 regulator inlet (replacement o-ring used where the regulator meets your CO2 tank for a tight seal).

The Autopilot PX1 Digital Lighting Controller from Hydrofarm provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple USB-compatible Hydrofarm ballasts at once—up to 256 in each of two independent

The Hyperion® 2 is the solution when looking for a complete environmental and lighting controller. Using the Hyperion® platform and SunWave® Technology, this product has the ability to control and monitor: temperature, humidity, CO2 and turn on and off fo

The Autopilot PPM-5 CO2 Controller is a simple and affordable way to control your CO2 injection device. Choose your desired CO2 parts per million (PPM) level, and the controller will automatically maintain that specified CO2 level. A built-in photocell lo

Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use

Controls and monitors CO2 in (2) two rooms from 0 to 2000 parts per million (PPM). Two (2) remote room sensors with 25 foot cables (included). Integrated 24 hour data logging feature. Two outputs to operate CO2 equipment. Enclosure resists dust, rust and

The Hyperion® Data Transfer Module is the next step in keeping you informed with what's going on in your grow room. Using SunWave™ technology, this product allows you to receive all the readings from your Hyperion® controller product on your smart phone.

The Titan Controls® CO2 heater was designed to prevent CO2 regulator freeze-up and avoid cracking the internal diaphragm of the regulator due to high flow conditions. The CO2 Heater is installed between the CO2 cylinder valve and the regulator and warms t

The Apollo® 18 has two separate timing schedules and can operate two different appliances simultaneously. It features 8 timing schedules per total day and the enclosure resists dust, rust and moisture in the garden environment. This precision digital time

The HydroGEN PRO is the world’s first and only water cooled CO2 generator. Water cooling can remove 86% of the heat produced by burning propane and has many features not available in any other CO2 generator on the market. The unit can easily be used in a

The CGC-1e Complete Greenhouse Controller controls all of the main devices required in today's modern hydroponic garden—your HID lights, supplemental CO2, hydroponic pumps, and exhaust fans or air conditioner. Your garden's HID lights are controlled by a

Active Air 100 ft. CO2 Drilled Tubing. Use with CO2 regulator and tank to evenly distribute CO2 to your grow area and plants.

The Autopilot Dehumidifying Humidistat is a compact and easy-to-use controller for dehumidifiers and exhaust fans. Simply plug it into a power receptacle and then plug your dehumidifying device into its outlet, then choose your preferred relative humidity

The Autopilot Cooling Thermostat is a compact and easy-to-use controller for air conditioners and exhaust fans. Simply plug it into a power receptacle and then plug your cooling device into its outlet, then choose your preferred room temperature setpoint

The Green Pad Co2 Generator is one of the simplest and easiest ways to generate Co2 for your garden.

All you have to do is hang the pad up above your plants, lightly spray with some water, and walk away! The Green Pad is activated through moisture and wi

The APCECO offers indoor gardeners an economical and simple method of monitoring and controlling CO2 within the grow area. It utilizes a highly visible and intuitive LED indicator display to let you know generalized CO2 levels. The LED indicator will blin

20 Lb. all aluminum CO2 Tank (tank is empty)
Give your customers the best CO2 tanks available. The Co2 cylinder is produced from high strength aluminum alloy. These tanks are popular because they are not as heavy as steel tanks and do not rust.

Manufa

Active Air climate control products are available for a variety of indoor growing applications. Whether fans, CO2 systems, filters, or any other product in the line, they have all been custom engineered for hobby and commercial growers to provide both per